Project Integra - Uk Build

Post your pics here!

Moderators: Ami, evtsteward


Topic Author
ukteg
Legit G1Tegger
Posts: 154
Joined: September 10th, 2012, 12:17 am
Location: Uk - sheffield
Contact:

Re: Project Integra - Uk Build

Postby ukteg » October 24th, 2013, 10:07 pm

update - 24.10.2013

few more things done over the last few weeks

first off is my teg never had a under bonnet cover - till now that is, took from a old one i saved

Image

Image

not very clean, was left outside for 4years so bound to be worse off

Image

went over it with spray dye from autoglym

Image

Image

fitted on

Image

Image

also been have fun doing the Mugen rims, now these took some proper doing, all done by hand, the outer rim only the center was powder coatded

pics may get a little mixed up - not gone in in order

centers

Image

Image

Image

Image

how the looked on the return

Image

Image

Image

Image

Image

these are the rims

all come in same condition

getting through the crap

Image

Image

one part done one not

Image

Image

Image

Image

Image

Image

also polished the nuts up

Image

Image

Image

Image

second set

Image

Image

3rd

Image

Image

4th

Image

wheel number 2

Image

Image

Image

Image

Image

put one back togeather - just could not wait

Image

Image

Image

Image

also had only got 3 caps so need another if any one has one for sale

not best but try to make them better

Image

Image

more to add later
86 Integra EXI x1
87 Integra EXI x1
88 Integra EXI x1
90 Honda Concerto 1.6-16
89 Integra EXI x2
71 Triumph Dolamite
89 Integra LX auto x1

Image
coming soon ukdmjdmparts.co.uk

User avatar

MugenBOI
Legit G1Tegger
Posts: 282
Joined: September 18th, 2012, 2:15 pm
Location: Santa Maria,Ca CENRTAL COAST

Re: Project Integra - Uk Build

Postby MugenBOI » October 25th, 2013, 10:12 pm

Gorgeous


Topic Author
ukteg
Legit G1Tegger
Posts: 154
Joined: September 10th, 2012, 12:17 am
Location: Uk - sheffield
Contact:

Re: Project Integra - Uk Build

Postby ukteg » November 8th, 2013, 9:48 pm

update 8.11.13

bit more of this elbow work - hope to have some fresh tires next week

Image

Image

Image

Image

Image

Image

few pics while out with the camera

Image

Image

Image

Image

Image
86 Integra EXI x1
87 Integra EXI x1
88 Integra EXI x1
90 Honda Concerto 1.6-16
89 Integra EXI x2
71 Triumph Dolamite
89 Integra LX auto x1

Image
coming soon ukdmjdmparts.co.uk

User avatar

Miketakeahike
G1 n00b
Posts: 99
Joined: May 21st, 2013, 9:00 am
Location: Stockholm, Sweden

Re: Project Integra - Uk Build

Postby Miketakeahike » November 11th, 2013, 3:45 pm

I would like to send my Teg on "TLC-camp" with UKTEG :mrgreen:
Babyblue Teg 1988 5D
"http://s1344.photobucket.com/user/Miketakeahike/library/Acura"
If you are a Yank beware, the rest of the world uses the metric system ;)


Topic Author
ukteg
Legit G1Tegger
Posts: 154
Joined: September 10th, 2012, 12:17 am
Location: Uk - sheffield
Contact:

Re: Project Integra - Uk Build

Postby ukteg » January 12th, 2014, 9:02 pm

Miketakeahike wrote:I would like to send my Teg on "TLC-camp" with UKTEG :mrgreen:


ill come visit for 3months and work my magic :lol: :lol:

small up date over christmas and new year

12.01.14

Image

Image

Image

Image

Image

Image

Image

Image

Image


had to make some more spot light brackets as the others started to snap

Image

Image

Image

Image

Image

back on

Image

Image

also picked up a genuine cambelt and put an order in for a few more from Honda

Image

not far now till the wheels are done

keep ya posted
86 Integra EXI x1
87 Integra EXI x1
88 Integra EXI x1
90 Honda Concerto 1.6-16
89 Integra EXI x2
71 Triumph Dolamite
89 Integra LX auto x1

Image
coming soon ukdmjdmparts.co.uk


Topic Author
ukteg
Legit G1Tegger
Posts: 154
Joined: September 10th, 2012, 12:17 am
Location: Uk - sheffield
Contact:

Re: Project Integra - Uk Build

Postby ukteg » January 12th, 2014, 9:05 pm

last wheel

Image

Image

Image
86 Integra EXI x1
87 Integra EXI x1
88 Integra EXI x1
90 Honda Concerto 1.6-16
89 Integra EXI x2
71 Triumph Dolamite
89 Integra LX auto x1

Image
coming soon ukdmjdmparts.co.uk


Topic Author
ukteg
Legit G1Tegger
Posts: 154
Joined: September 10th, 2012, 12:17 am
Location: Uk - sheffield
Contact:

Re: Project Integra - Uk Build

Postby ukteg » February 25th, 2014, 10:50 pm

update 25.2.14

got the rocker cover sorted

Image

Image

Image

Image

Image

also got the small springs coated - well both sets

Image

Image

Image

need to get the spacers made up to the size i need
86 Integra EXI x1
87 Integra EXI x1
88 Integra EXI x1
90 Honda Concerto 1.6-16
89 Integra EXI x2
71 Triumph Dolamite
89 Integra LX auto x1

Image
coming soon ukdmjdmparts.co.uk


Topic Author
ukteg
Legit G1Tegger
Posts: 154
Joined: September 10th, 2012, 12:17 am
Location: Uk - sheffield
Contact:

Re: Project Integra - Uk Build

Postby ukteg » March 22nd, 2014, 11:00 pm

Update 21.03.14

managed to get the wheels finished and put back in one peice

Image

Image

Image

Image

Image

all sorted

Image

Image

Image

nice reflection on the lip

Image

also horn fitted but not wired

Image

also took the top edge from the rocker cover

Image

Image

Image

new turn up is a small fuel leak around the carb area and exhaust is now not just a broken backbox but also the center section had now snapped

also hear wind from the door seals (ones fitted to the car not doors) which also lets car mist up when stood for a while on wet cold days

looking busy over this week coming i think
86 Integra EXI x1
87 Integra EXI x1
88 Integra EXI x1
90 Honda Concerto 1.6-16
89 Integra EXI x2
71 Triumph Dolamite
89 Integra LX auto x1

Image
coming soon ukdmjdmparts.co.uk

User avatar

evtsteward
Site Admin & Crunkass Teg Mechanic
Posts: 847
Joined: January 28th, 2007, 7:05 pm
Location: Marysville, Wa 98270

Re: Project Integra - Uk Build

Postby evtsteward » March 23rd, 2014, 10:59 am

I'll still say Wow!, just Wow! with your car. :shock:
Robert, that crazy guy with all the tegs!
Always an honor to be quoted.-B18Ch1ck
The great ships hung in the air in much
the same way bricks don't.-Douglas Adams

The value of life can be measured by how many
times your soul has been deeply stirred.-Soichiro Honda

User avatar

raisedhaze
Legit G1Tegger
Posts: 128
Joined: October 19th, 2012, 6:55 pm
Location: MN

Re: Project Integra - Uk Build

Postby raisedhaze » March 24th, 2014, 1:44 pm

Awesome work. Keep it going!

Ps I love that center console tray. If you find any others in your neck of the woods, please keep us informed! I'd gladly buy one. :)
________________________
1986 Acura Integra Type-RS
B18C1 turbo swap
________________________


Topic Author
ukteg
Legit G1Tegger
Posts: 154
Joined: September 10th, 2012, 12:17 am
Location: Uk - sheffield
Contact:

Re: Project Integra - Uk Build

Postby ukteg » April 7th, 2014, 10:10 pm

raisedhaze wrote:Awesome work. Keep it going!

Ps I love that center console tray. If you find any others in your neck of the woods, please keep us informed! I'd gladly buy one. :)


think ive got one or two laying about ill find them out - should have a blue and grey

update 07.04.2014

OMG ive been busy over the last few weeks doing 80+hours on avarge per week

but anyway had some fetteling on the teg had a blown rocker gasket so got a new one from Honda and thought id convert the rocker over and do the gasket the the same time

you can see where it was leaking

Image

Image

Image

Image

clean down - also noticed the gasket would not suit the Civic rocker dew to line up jugs
and also sits lower the the one already fitted so need the civic rocker lug nuts as there smaller/shorter

Image

Image

civic rocker for test

Image

Image

Image

Image

Image

Image

Image

also made a new earth strap - took from a VW Golf was to long so cut it down and re soldered it

Image

Image

Image

Image

all fitted - stuck with the older rocker till i sort the bits out

Image

Image

also a repaint the the wiper arms

Image

Image

Image

Image

ill add more later - gotta run
86 Integra EXI x1
87 Integra EXI x1
88 Integra EXI x1
90 Honda Concerto 1.6-16
89 Integra EXI x2
71 Triumph Dolamite
89 Integra LX auto x1

Image
coming soon ukdmjdmparts.co.uk

User avatar

evtsteward
Site Admin & Crunkass Teg Mechanic
Posts: 847
Joined: January 28th, 2007, 7:05 pm
Location: Marysville, Wa 98270

Re: Project Integra - Uk Build

Postby evtsteward » April 8th, 2014, 1:13 pm

Maybe you could help this fellow member out with his clutch cable need? Thanks!! :D
viewtopic.php?f=22&t=981
Robert, that crazy guy with all the tegs!
Always an honor to be quoted.-B18Ch1ck
The great ships hung in the air in much
the same way bricks don't.-Douglas Adams

The value of life can be measured by how many
times your soul has been deeply stirred.-Soichiro Honda


Topic Author
ukteg
Legit G1Tegger
Posts: 154
Joined: September 10th, 2012, 12:17 am
Location: Uk - sheffield
Contact:

Re: Project Integra - Uk Build

Postby ukteg » April 10th, 2014, 10:06 pm

evtsteward wrote:Maybe you could help this fellow member out with his clutch cable need? Thanks!! :D
viewtopic.php?f=22&t=981


he mailed me and sent a reply

update from last session

took the car for it exhaust the other week the work was fantastic

Image

Image

Image

Image

Image

Image

Image

Image

also painted the front bumper, this was a task dew to where we painted it and weather being on and off

Image

Image

front carry bar
Image

Image

this front trim was not easy to move - screws had to be drilled out but replaced them with 10mm bolts

Image

Image


Image

Image

front bumper repair

Image

Image

Image

under cote for primer

Image

Image

primer

Image

Image

Image

Image

paint - and yeah in my back garden :lol: did all of it but did the strip after

Image


bro on the job
Image

Image

Image

Image

Image

Image

fitted for a test match

Image

Image

Image

Image

back off for the strip to be painted, just dont look right all one shade

Image

Image

Image

Image

sorted

Image

bottom section

Image

Image

Image

all fitted back on

Image

Image

Image

Image

Image

Image

Image

Image

just need to fit the splitter - OEM this time

hope for tires soon for the mugens
and the quint spoiler is in for painting this weekend
going to try for the rear bumper painted to
86 Integra EXI x1
87 Integra EXI x1
88 Integra EXI x1
90 Honda Concerto 1.6-16
89 Integra EXI x2
71 Triumph Dolamite
89 Integra LX auto x1

Image
coming soon ukdmjdmparts.co.uk

User avatar

evtsteward
Site Admin & Crunkass Teg Mechanic
Posts: 847
Joined: January 28th, 2007, 7:05 pm
Location: Marysville, Wa 98270

Re: Project Integra - Uk Build

Postby evtsteward » April 11th, 2014, 1:13 pm

Dude, that looks fantastic! You're killing it with this restore. Love what you've done!
:D
Robert, that crazy guy with all the tegs!
Always an honor to be quoted.-B18Ch1ck
The great ships hung in the air in much
the same way bricks don't.-Douglas Adams

The value of life can be measured by how many
times your soul has been deeply stirred.-Soichiro Honda

User avatar

raisedhaze
Legit G1Tegger
Posts: 128
Joined: October 19th, 2012, 6:55 pm
Location: MN

Re: Project Integra - Uk Build

Postby raisedhaze » April 14th, 2014, 11:00 pm

evtsteward wrote:Dude, that looks fantastic! You're killing it with this restore. Love what you've done!
:D


+1, lots of detail work. Keep it up!
________________________
1986 Acura Integra Type-RS
B18C1 turbo swap
________________________


Topic Author
ukteg
Legit G1Tegger
Posts: 154
Joined: September 10th, 2012, 12:17 am
Location: Uk - sheffield
Contact:

Re: Project Integra - Uk Build

Postby ukteg » May 25th, 2014, 9:35 pm

evtsteward wrote:Dude, that looks fantastic! You're killing it with this restore. Love what you've done!
:D


cheers - not going to mental its how the 16valve models look

update 25.5.14

not got much done, but thought id show my face

had a crack doing the window tints

Image

Image

Image

Image

Image

not got them finished yet, they look black on some side shots - there 35%
will take them off and go lighter i think

also found a small project, these are a set of front indicators from a mk1 Toyota MR2
look very close to fitting

integra
Image

mr2 - i bought this car it was stood for 10years but sold it the same day

Image

Image

over top of the teg

Image

Image

Image

could work, ill see how they look fitted in the bumper
should have the windows done this week and the wheels fitted

and just done a order of a set of T-bars, upgrademotoring said its there first shipment to the UK

more to come soon
86 Integra EXI x1
87 Integra EXI x1
88 Integra EXI x1
90 Honda Concerto 1.6-16
89 Integra EXI x2
71 Triumph Dolamite
89 Integra LX auto x1

Image
coming soon ukdmjdmparts.co.uk


Topic Author
ukteg
Legit G1Tegger
Posts: 154
Joined: September 10th, 2012, 12:17 am
Location: Uk - sheffield
Contact:

Re: Project Integra - Uk Build

Postby ukteg » May 25th, 2014, 9:49 pm

Exhaust i had fitted - powerflow center section and rear section will get better with age

we dont have a CAT on ours, it become law in 1992 so no need to de-cat

http://www.youtube.com/watch?v=PRH6dmoZ ... gyZWuLOfuQ
86 Integra EXI x1
87 Integra EXI x1
88 Integra EXI x1
90 Honda Concerto 1.6-16
89 Integra EXI x2
71 Triumph Dolamite
89 Integra LX auto x1

Image
coming soon ukdmjdmparts.co.uk


Topic Author
ukteg
Legit G1Tegger
Posts: 154
Joined: September 10th, 2012, 12:17 am
Location: Uk - sheffield
Contact:

Re: Project Integra - Uk Build

Postby ukteg » July 12th, 2014, 8:20 pm

update 12.07.2014

alright guys thought id call in for a update,

been quite bust over the pond we have sun :shock: for a while so my valet/detail work is busy but still got a few bits done

still dont have the windows finished/tinted but did get the tires fitted and put the Mugens on

but FAIL they look way way to small :shock:

before i start we had problem with the valves, looked usless so disposed for new when going to the garage
in witch they could not supply as the style was not UK valves, so come back to find the others out which was a rubber seal problem so had to make some more

Image

Image

all done

Image


tires on

Image

Image

come back two hours later to find 2 flat - new valves ordered need to have the redone
but really dont like them when fitted looks to small - add pic later

After that nightmere we moved onto Sounds (love music) got myself some Focal K2 speakers/crossovers from the yard a while ago but was 17cm so no fit into the doors on the teg

again been persistant i wanted them fitted so a custom job was needed

seen a few styles but went balls out with a boot full :lol: started with cardboard cut outs

damm gotta go for ten min back soon
86 Integra EXI x1
87 Integra EXI x1
88 Integra EXI x1
90 Honda Concerto 1.6-16
89 Integra EXI x2
71 Triumph Dolamite
89 Integra LX auto x1

Image
coming soon ukdmjdmparts.co.uk


Topic Author
ukteg
Legit G1Tegger
Posts: 154
Joined: September 10th, 2012, 12:17 am
Location: Uk - sheffield
Contact:

Re: Project Integra - Uk Build

Postby ukteg » July 12th, 2014, 9:31 pm

as i said cardboard cut outs

look how clean - first time i looked in here

Image

Image

Image

This is what i have at the min - Vibe B3 sub with amp - Alpine rear speakers - pioneer fronts

Image

the templates

Image

Image

Image

spent time cutting bits out to get the right shape

Image

Image

Image

Image

Image

Image

ready for build
Image

Image

Image

Image

speaker cut

Image

sealed with sound deadning - sealant - screws

Image

Image

time for felt - Autoleads sound carpet

Image

Image

Image

Image

Image

Image

speaker in

Image

Image

Image

Image

Image

Image

on with the other side same again with the cut out just turned inside out with small ajustment

Image

Image

Image

Image

Image

Image

Image

all done

Image

Image

Now the sub box needed changing so took mesurements from that and made it longer and put a slope to the front

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

covered - used all proper clips wires ect

Image

Image

Image

Image

Image

Image

all slotted in place looking damm nice i think

Image

Image

Image

Image

Image

also grabbed a bargin on this amp made by Lanzar Vibe 531

Image

still need to fit it in and the crossovers and tweeters

hope you like
86 Integra EXI x1
87 Integra EXI x1
88 Integra EXI x1
90 Honda Concerto 1.6-16
89 Integra EXI x2
71 Triumph Dolamite
89 Integra LX auto x1

Image
coming soon ukdmjdmparts.co.uk

User avatar

john89teg
G1 n00b
Posts: 59
Joined: June 1st, 2014, 8:54 pm
Location: Arlington, Texas

Re: Project Integra - Uk Build

Postby john89teg » July 12th, 2014, 11:00 pm

Clean install!

Sent from my Z796C using Tapatalk
"Who needs a signature?" -John89teg

User avatar

Integra
Legit G1Tegger
Posts: 125
Joined: February 20th, 2014, 9:10 am
Location: Gorredijk - Holland

Re: Project Integra - Uk Build

Postby Integra » July 13th, 2014, 2:11 pm

ukteg wrote:also found a small project, these are a set of front indicators from a mk1 Toyota MR2
look very close to fitting

Image

could work, ill see how they look fitted in the bumper
more to come soon


That is a great idea!
Now I'm looking for a pair of MR2 bumperlights....

Just a bad Pantbrush picture... but it gives the idea:

Image

Will look great!

User avatar

Mikakey
Legit G1Tegger
Posts: 124
Joined: May 31st, 2014, 5:49 am
Location: Plattsburgh, NY 12901

Re: Project Integra - Uk Build

Postby Mikakey » July 14th, 2014, 6:45 pm

Nice car man! Love the look and how it looks restored. Can't wait to see pics with the rims on the car. Of all the things I like I actually love the sound system you made the most. I'm really impressed with it because I have never done it before and now realize how people do it with the cardboard template. Keep up the good work man.
Blue 1987 Integra
B20VTEC with Stage 2 Exedy clutch and lightweight flywheel, DC headers, custom exhaust with APEXi muffler, and Hondata S300 tune.
Upgrade Motoring 27.5mm torsion bars with KYB GR-2s and B&G rear springs.


redteg73
Legit G1Tegger
Posts: 159
Joined: September 16th, 2012, 3:38 am
Location: Virginia, where the bacon is at

Re: Project Integra - Uk Build

Postby redteg73 » July 15th, 2014, 2:35 am

Thats a lot of sub action in that trunk! Looking good like always.


Topic Author
ukteg
Legit G1Tegger
Posts: 154
Joined: September 10th, 2012, 12:17 am
Location: Uk - sheffield
Contact:

Re: Project Integra - Uk Build

Postby ukteg » July 17th, 2014, 9:08 pm

Mikakey wrote:Nice car man! Love the look and how it looks restored. Can't wait to see pics with the rims on the car. Of all the things I like I actually love the sound system you made the most. I'm really impressed with it because I have never done it before and now realize how people do it with the cardboard template. Keep up the good work man.


cheers dude, easy to do you want to try it, you can add fiberglass after/over the wood smooth it off and paint it and then its a polish worthy surfice

bit more update, got the other bits fitted

tweeters fitted
Image

Image

Image

Image

Image

running the Focal crossovers also made all new connections on the wires + loom

Image

Image

Image

Image

Image

Image

Image

Image

Image

needed some Y RCA splitter wires - male to 2 female for the amp - no where sold them when i needed them so made some

Image

Image

how it looks with the backseats down, i can roll the sub backward and it sits on the seats perfect for Bass bang behind ya :lol:

Image

Image

Image

so far so good

Image

Image

next was a floor for the Amp to sit on, added a flab for easy take out

Image

Image

Image

covering
Image

Image

Image

Image

all in

Image

Image

Image

Image

silver badge is a Vibe badge

Image

sub level remote
Image

all wiped down and about complete - also went out and got new RCA wires dew to the made ones been a grade to thin

Image

hope you like - and yes its SO noisy you can here it 4 streets away pushing 110db
we had a few over the road fit a install in his van and one in a car last month and thought it was the nuts

till ours started :lol: :mrgreen:
86 Integra EXI x1
87 Integra EXI x1
88 Integra EXI x1
90 Honda Concerto 1.6-16
89 Integra EXI x2
71 Triumph Dolamite
89 Integra LX auto x1

Image
coming soon ukdmjdmparts.co.uk


Topic Author
ukteg
Legit G1Tegger
Posts: 154
Joined: September 10th, 2012, 12:17 am
Location: Uk - sheffield
Contact:

Re: Project Integra - Uk Build

Postby ukteg » July 30th, 2014, 9:55 pm

update 30.7.14

well guys, ive gone further, not enough sound up front so added a few more bits

Auna 500w fronts
Magnet Xcentric 162 crossovers
Pioneer tweeters
custom home made wire loom

signal took from the front speaker wire - from ISO plug

converted to RCA phono leads then took to the amp then returned to the front back to the ISO for speakers to keep the loom from the dash in use

where the crossovers will go

Image

Image

front speakers wired up - used solder and srink wrap for a clean job

Image

Image

Image

Image

Image

Image

loom made up

Image

Image

Image

Image

tweeters made to sit right wire come from the bottom and needed it from the back

Image

Image

Image

Image

crossover wires fitted

Image

Image

Image

Image

inplace

Image

Image

Image

Image

wires for the front

Image

all in

Image

Image

amp RCA lead dew to 5ch amp

Image

Image

Image

also needed to raise the amp a bit - found some stands sort of

Image

Image

Image

its all in place now and sounds a whole lot better, still got a sound suppressor to fit and powercap to source

ill get these in over the week
86 Integra EXI x1
87 Integra EXI x1
88 Integra EXI x1
90 Honda Concerto 1.6-16
89 Integra EXI x2
71 Triumph Dolamite
89 Integra LX auto x1

Image
coming soon ukdmjdmparts.co.uk


redteg73
Legit G1Tegger
Posts: 159
Joined: September 16th, 2012, 3:38 am
Location: Virginia, where the bacon is at

Re: Project Integra - Uk Build

Postby redteg73 » August 1st, 2014, 10:48 pm

I dig those tweeters on the dash, not something you see too often


Topic Author
ukteg
Legit G1Tegger
Posts: 154
Joined: September 10th, 2012, 12:17 am
Location: Uk - sheffield
Contact:

Re: Project Integra - Uk Build

Postby ukteg » August 30th, 2014, 10:00 pm

redteg73 wrote:I dig those tweeters on the dash, not something you see too often


thats true - quite old skool

small update

30.08.14

Well after running the amp for a while all felt fine - untill i left it on while picking a mate up when come back 6mins later and car wont start + automatic so cant bump start it :oops:

Power junky amp

installed a noise suppressor to help stop a little wizzing sound

Image

Image

Image

Also got my powercap but after further reading these can also steal power dew to the recharge side of the unit - not yet installed this

Image

am also running it on a to thin power cabel with a 30amp fuse it should be a 60 but that will defo melt the wire -

a new 2000w vibe wire kit to fit next also upgrade the leads from the ALT to the Batt and an earth kit to

also need a better Batt so getting a yellow Optima one

mate turned up in his new car

Image

Image

Image

nice bit of motor - although had my hands on it for a full inside clean day he got it


off topic found these at the yard - perfect for round the car at shows

Image

more to come later
86 Integra EXI x1
87 Integra EXI x1
88 Integra EXI x1
90 Honda Concerto 1.6-16
89 Integra EXI x2
71 Triumph Dolamite
89 Integra LX auto x1

Image
coming soon ukdmjdmparts.co.uk


redteg73
Legit G1Tegger
Posts: 159
Joined: September 16th, 2012, 3:38 am
Location: Virginia, where the bacon is at

Re: Project Integra - Uk Build

Postby redteg73 » September 5th, 2014, 1:41 am

Is that a type r?


Topic Author
ukteg
Legit G1Tegger
Posts: 154
Joined: September 10th, 2012, 12:17 am
Location: Uk - sheffield
Contact:

Re: Project Integra - Uk Build

Postby ukteg » October 9th, 2014, 8:47 pm

redteg73 wrote:Is that a type r?


yep its a UK model DC5 Integra he also has a EP3 Civic type R and a Mini cooper S
very lucky guy lol

small update 9.10.2014

Well i found i was using the wrong power cabel on the amp one fitted was for 300w lucky i was only running a 30amp fuse

got myself the right one now with a quick power cut fuse holder

Image

Image

Image

power cap fitted but not wired yet

Image

Image

New front pads fitted - old ones look about done

Image

Image

small shoot

Image

Image

Image

Image

Image

Image

Image

Image

Image

Got some RED light bulb paint thought id sort the rear bulbs, makes them a dark red when lit

Image

Image

Image

Image

Grabbed a brand new front lower splitter, very unusual to come across a never fitted item

Image

Image

Image

Check these new bolts - we have had some bad ones of these can never removed a already fitted one dew to these rusting to bits

Image

all fitted on

Image

Image

Image

Image

Image

another small shoot

Image

Image

Image

Image

Image

Image

Image

Image

also grabbed a set of rear seat belts as mine are just the lap over ones manual adjust
these are the spring loaded type
looks like we have to take all the rear out just to fit

Image

Image

further cable for the earth

Image

picked up some floor mats, better than the ones ive got

before and after just a clean for the moment, will repair the burns, should have them looking mint again

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

will detail how to repair small burns when we do them
lot better now fitted in

more to come shorly
86 Integra EXI x1
87 Integra EXI x1
88 Integra EXI x1
90 Honda Concerto 1.6-16
89 Integra EXI x2
71 Triumph Dolamite
89 Integra LX auto x1

Image
coming soon ukdmjdmparts.co.uk

User avatar

evtsteward
Site Admin & Crunkass Teg Mechanic
Posts: 847
Joined: January 28th, 2007, 7:05 pm
Location: Marysville, Wa 98270

Re: Project Integra - Uk Build

Postby evtsteward » October 10th, 2014, 1:33 am

Still have the pistol grip shifter up for grabs. :D Your ride is looking nice!
Robert, that crazy guy with all the tegs!
Always an honor to be quoted.-B18Ch1ck
The great ships hung in the air in much
the same way bricks don't.-Douglas Adams

The value of life can be measured by how many
times your soul has been deeply stirred.-Soichiro Honda


Topic Author
ukteg
Legit G1Tegger
Posts: 154
Joined: September 10th, 2012, 12:17 am
Location: Uk - sheffield
Contact:

Re: Project Integra - Uk Build

Postby ukteg » December 6th, 2014, 10:48 pm

evtsteward wrote:Still have the pistol grip shifter up for grabs. :D Your ride is looking nice!


sounds good - ill Pm ya for details

small update 6.12.2014

got the belts fitted

Image

Image

had to change the rear trim as i didnt have the hols in the plastic

Image

Image

Image

Image

Image

Image

Image

also got some steering rack bushes but dont think these are the ones i needed

Image

Image

just need to fit the lower belt clips ill get that sorted next
86 Integra EXI x1
87 Integra EXI x1
88 Integra EXI x1
90 Honda Concerto 1.6-16
89 Integra EXI x2
71 Triumph Dolamite
89 Integra LX auto x1

Image
coming soon ukdmjdmparts.co.uk


Topic Author
ukteg
Legit G1Tegger
Posts: 154
Joined: September 10th, 2012, 12:17 am
Location: Uk - sheffield
Contact:

Re: Project Integra - Uk Build

Postby ukteg » January 11th, 2015, 10:14 pm

glad to see we back up - you feel all out of order it is when is gone
i click everyday and have for many many years

big thanks to the Brains who work it for us all


update 11.1.15

Managed to get the rear belts in fully

Image

Image

Image

Image

looks a lot better just need to clean the seats

few snow pics

Image

Image

Image

Image

Image

Image

Image

Also come acorss a massive paint defect its been slowly getting worse,

its from when i had the boyshop repaint the bonnet/hood and roof did look spot on when i got it back but as the months passed its got bad

was done by a guy/company where we did a lot of detailing and finishing work - No longer do we moved on

but this is what am left with,
its going to a proper top painter for a full job i think

Image

Image

Image


very sad to see this
86 Integra EXI x1
87 Integra EXI x1
88 Integra EXI x1
90 Honda Concerto 1.6-16
89 Integra EXI x2
71 Triumph Dolamite
89 Integra LX auto x1

Image
coming soon ukdmjdmparts.co.uk

User avatar

MinkelR
Site Admin
Posts: 625
Joined: November 23rd, 2006, 10:25 pm
Location: Bellingham, WA

Re: Project Integra - Uk Build

Postby MinkelR » January 11th, 2015, 10:46 pm

At first I thought those were water droplets but realized the paint is bubbling up. That sucks. Hope you can find a good shop.
1987 Acura Integra LS (Rest in Pieces)
1989 Acura Integra LS Daily Driver
1992 Mazda 323 (Sold)


Topic Author
ukteg
Legit G1Tegger
Posts: 154
Joined: September 10th, 2012, 12:17 am
Location: Uk - sheffield
Contact:

Re: Project Integra - Uk Build

Postby ukteg » March 22nd, 2015, 10:40 pm

MinkelR wrote:At first I thought those were water droplets but realized the paint is bubbling up. That sucks. Hope you can find a good shop.


ive got good place inline also had someone scrape down the side of it, not major damage was very lucky
86 Integra EXI x1
87 Integra EXI x1
88 Integra EXI x1
90 Honda Concerto 1.6-16
89 Integra EXI x2
71 Triumph Dolamite
89 Integra LX auto x1

Image
coming soon ukdmjdmparts.co.uk

User avatar

Mr NW Classic
NW Classic Honda
Posts: 426
Joined: September 13th, 2012, 4:33 am
Location: Seattle, WA
Contact:

Re: Project Integra - Uk Build

Postby Mr NW Classic » April 28th, 2015, 7:27 pm

Dang that sucks about the paint. The rest of the car is coming together nicely though.
"Your one stop shop for pre-1988 Honda/Acura parts"
206-940-8173 :D

72-87 Civic
84-87 CRX
86-89 Integra
79-87 Prelude
76-89 Accord


Topic Author
ukteg
Legit G1Tegger
Posts: 154
Joined: September 10th, 2012, 12:17 am
Location: Uk - sheffield
Contact:

Re: Project Integra - Uk Build

Postby ukteg » May 9th, 2015, 10:24 pm

update 09.05.2015


forgot to add this last time
this is what happened the other month when someone went down the side of the car

Image

Image

Image

his car

Image

Image

Image

Image

back to the job in hand Stereo

well after all the install i was chasing and electrical buzz within the setup coming through the speakers

this comes in dew to
Amp connections,
Hi powered amp being low power fed,
bad earths within the car,
under rated stereo made to do more,

so after a few times of removing the set up and checking back of what was done,

id put a fatter power cable from the battery to the amp, the amp has 40cm of fitted cable not able to remove, so id fitted a extra fuse holder,
one wire from the amp to one side and the fatter one from the battery to the other side - worked ok so i thought, so changed the set up for a different holder fed direct by the fat cable

Image

Image

Image

went for a outside fitment but the seat would not close back up, also looked untidy

Image

so all back out and fit it inside

Image

Image

Image

Image

Image

all back in and guess what - same problem :twisted:

Image

last of the day shot

Image

next task - engine earth cable possible to thin so uprated that

Image

still no change so changed the Earth from the amp to the body, got a Kicker earth point

old set up

Image

new point also made shorter

Image

Image

Image

Image

Image

Image

Image

Image

and still no better still buzzing, getting pritty pissed we it by this time and wont stop till its done it also has a large power off pulse i dont like

sat down and thought something is missing...............CLICK

wonder if the stereo it self wants a earth and the OEM unit screws from behind to the frame

ill try one so made a cable

Image

found a place to screw to the stereo OEM place and then to the frame

Image

OMG the buzzing has gone - took the earth away buzzing back touch the screw again to earth - buzzing gone

:D :D :D :D :D :D

small drive out with a working stereo

Image

Image

Image

Image

Image

left it for a week or so and was not happy again dew to wanting more clear better sound

went and got another stereo and DAB unit antana :mrgreen:

Image


more to come later
86 Integra EXI x1
87 Integra EXI x1
88 Integra EXI x1
90 Honda Concerto 1.6-16
89 Integra EXI x2
71 Triumph Dolamite
89 Integra LX auto x1

Image
coming soon ukdmjdmparts.co.uk

User avatar

87g1teger
Legit G1Tegger
Posts: 385
Joined: January 1st, 2005, 10:49 pm
Location: The 310!!
Contact:

Re: Project Integra - Uk Build

Postby 87g1teger » June 4th, 2015, 9:29 pm

nice
Use the "View Active Topics" button on the main page to see what's going on..
"Bro, I only have two hands and one dick. I could only put in one mouth at a time." - Jon Martin
Hacking up your Hondas and Acuras Since 05'!


Topic Author
ukteg
Legit G1Tegger
Posts: 154
Joined: September 10th, 2012, 12:17 am
Location: Uk - sheffield
Contact:

Re: Project Integra - Uk Build

Postby ukteg » September 6th, 2015, 10:11 pm

Hi Guys, long time from posting, just so busy i cant even sit still

well am here now so ill updtae

update 6.9.2015

As said above i decided to get another stereo dew to the one before was just not pushing what was needed

upgraded earths

Image

wiring was a task to all fit in

Image

Image

Image

Image

Image

back up for the batt

Image

Image

Image

Image

Image

stereo is all fitted in and works a treat

Now on to the door trim, had some chips and rather than paint it i covered it with viynal

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

while out for a bit

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

got so more to add later on after another small spend
86 Integra EXI x1
87 Integra EXI x1
88 Integra EXI x1
90 Honda Concerto 1.6-16
89 Integra EXI x2
71 Triumph Dolamite
89 Integra LX auto x1

Image
coming soon ukdmjdmparts.co.uk

User avatar

MinkelR
Site Admin
Posts: 625
Joined: November 23rd, 2006, 10:25 pm
Location: Bellingham, WA

Re: Project Integra - Uk Build

Postby MinkelR » September 10th, 2015, 5:33 am

Good stuff! You have one of the cleanest tegs here!
1987 Acura Integra LS (Rest in Pieces)
1989 Acura Integra LS Daily Driver
1992 Mazda 323 (Sold)


Topic Author
ukteg
Legit G1Tegger
Posts: 154
Joined: September 10th, 2012, 12:17 am
Location: Uk - sheffield
Contact:

Re: Project Integra - Uk Build

Postby ukteg » November 22nd, 2015, 11:12 pm

MinkelR wrote:Good stuff! You have one of the cleanest tegs here!



thanks MinkelR, ive a few weeks worth of update to do

ill get it on this week and also some (Back to life part 1) from the good old days
86 Integra EXI x1
87 Integra EXI x1
88 Integra EXI x1
90 Honda Concerto 1.6-16
89 Integra EXI x2
71 Triumph Dolamite
89 Integra LX auto x1

Image
coming soon ukdmjdmparts.co.uk


Topic Author
ukteg
Legit G1Tegger
Posts: 154
Joined: September 10th, 2012, 12:17 am
Location: Uk - sheffield
Contact:

Re: Project Integra - Uk Build

Postby ukteg » December 23rd, 2015, 10:34 pm

Little small update, 23.12.15

Few pics from a while ago

Image

Image

Image

Image


on with the mods

Managed to pick up some rear flaps brand new as well

Image

Image

Image

Image

Image

also grabbed another front splitter again brand new although did not last long a one

Image

Image

Image

Image

Image

all marked up

Image

Image

one become two

Image

Image

Image

all fitted.........to the rear, first did this mod back in 2008

before

Image

Image

after

Image

Image

Image

Image

with added sticker

Image
86 Integra EXI x1
87 Integra EXI x1
88 Integra EXI x1
90 Honda Concerto 1.6-16
89 Integra EXI x2
71 Triumph Dolamite
89 Integra LX auto x1

Image
coming soon ukdmjdmparts.co.uk

User avatar

evtsteward
Site Admin & Crunkass Teg Mechanic
Posts: 847
Joined: January 28th, 2007, 7:05 pm
Location: Marysville, Wa 98270

Re: Project Integra - Uk Build

Postby evtsteward » January 11th, 2016, 5:03 pm

Classy, as usual!!
Robert, that crazy guy with all the tegs!
Always an honor to be quoted.-B18Ch1ck
The great ships hung in the air in much
the same way bricks don't.-Douglas Adams

The value of life can be measured by how many
times your soul has been deeply stirred.-Soichiro Honda

User avatar

87g1teger
Legit G1Tegger
Posts: 385
Joined: January 1st, 2005, 10:49 pm
Location: The 310!!
Contact:

Re: Project Integra - Uk Build

Postby 87g1teger » February 9th, 2016, 5:33 am

so nice!!
Use the "View Active Topics" button on the main page to see what's going on..
"Bro, I only have two hands and one dick. I could only put in one mouth at a time." - Jon Martin
Hacking up your Hondas and Acuras Since 05'!


Topic Author
ukteg
Legit G1Tegger
Posts: 154
Joined: September 10th, 2012, 12:17 am
Location: Uk - sheffield
Contact:

Re: Project Integra - Uk Build

Postby ukteg » October 1st, 2016, 9:18 pm

Back for an update, Ive been away for a bit to long,

as some may know ive moved into a large unit and merging our Detailing and parts business in one place and its sure taking its time
so not much time doing mods to the Integra but ive a list for it before the bad weather comes in

ive been out and about in it for the odd drive out for pics for the fun

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

really need to get some paint work done on the roof and bonnet/hood
also popped a bulb out of its socket on the rear light and got the bulb stuck inside and my battery really cant cope with the power the Amp keeps taking

and also found that after heavy rain and the car stood once i get it and use the blowers i get water dripping from the fan area

not sure how its getting in just yet
86 Integra EXI x1
87 Integra EXI x1
88 Integra EXI x1
90 Honda Concerto 1.6-16
89 Integra EXI x2
71 Triumph Dolamite
89 Integra LX auto x1

Image
coming soon ukdmjdmparts.co.uk

User avatar

Ami
G1 n00b
Posts: 28
Joined: March 22nd, 2017, 3:37 pm
Location: Virginia
Contact:

Re: Project Integra - Uk Build

Postby Ami » March 31st, 2017, 7:43 pm

Looking great, mate!
Let's turn the mothership into a party boat! Post on G1Teg more frequently!

Image

Ami & Dan's 1987 LS Hatch *http://www.g1teg.org/viewtopic.php?p=9349*


Topic Author
ukteg
Legit G1Tegger
Posts: 154
Joined: September 10th, 2012, 12:17 am
Location: Uk - sheffield
Contact:

Re: Project Integra - Uk Build

Postby ukteg » July 22nd, 2017, 10:12 pm

Well all i can say is how time just passes by its been months +++ since i posted anything although i still visit most days

i feel Facebook is really slowing things up on here think we should bring back the good old days

many posts everyday always something to read or look at :) :)

lets start up..... update 22.7.2017

Well after a good while not adding clear coat to the mirrors left them to go to a matt finish
so a repaint and topcoat had to be done


Before

Image

Image

Image

Image

Image

Image


Image

Image

Image

Image

Image

After

Image

Image

Image

Image

Image

Image

Also come across a set of wheels at my local yard kinda liked look of them took one home to test and fit bob on

posted a pic on FB was told to grab them as there quite rare

later found they was Work Stark wheels

gave them a refurbish and come out ok


Image


Image


Image

Image

Image

Image

Image


Image

Image


Image

Image

Image

Image


Image

Image


Image

Image

Image


Image

center caps

Image


Image

Image

Image

Image

Image

wheels all ready for paint, went Matt black with silver lightly over the top

Image

Image


Image

Image

Image


Image

Image

Image


Image

Image

Image

Image

Image

Image


Image

Image

Image


Image

Dont look to bad in Black

silver top coat

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image


ive got them fitted on and also some other bits done ill get them up tomorrow
86 Integra EXI x1
87 Integra EXI x1
88 Integra EXI x1
90 Honda Concerto 1.6-16
89 Integra EXI x2
71 Triumph Dolamite
89 Integra LX auto x1

Image
coming soon ukdmjdmparts.co.uk


Topic Author
ukteg
Legit G1Tegger
Posts: 154
Joined: September 10th, 2012, 12:17 am
Location: Uk - sheffield
Contact:

Re: Project Integra - Uk Build

Postby ukteg » October 7th, 2017, 9:43 pm

Update 7.10.2017

alright folks, thought id some more up

will try and get them in the right order, last thing i posted was the wheels since then ive done

new rear weather muck guards
new rear door trim inserts
also took the washer jets on the roof and antenna also bonnet and flattened it off so i can repaint paint it properly

this is how the roof went

Image

Image

Image

Image

Image

Image

more to come on that later

My battered rear flaps after many ears water had gotten to them and rusted

Image

Image

Image

Image

all off

Image

Image

Image

Image

Image

Image

new and old

Image

Image

Image

Image

Image

cleaned the screws and repainted them

Image

Image

all on

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Few pics with the wheels fitted i really need to sort my ride height out

Image

Image

Image

Image

Image

Image

Image

Image

Now to the door rubbing strips, lucky i managed to get a new set ages ago brand new as well the old ones took on water and swollen

Image

Image

Image

Image

Image

Image

old and new

Image

Image

Image

Image

Image

all on

Image

Image

Image

Image

Image

other side

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

ive not got the roof sanded off pics up yet so will have to come after

best get it all sorted before our weather changes

looks a lot better now

back with more soon
86 Integra EXI x1
87 Integra EXI x1
88 Integra EXI x1
90 Honda Concerto 1.6-16
89 Integra EXI x2
71 Triumph Dolamite
89 Integra LX auto x1

Image
coming soon ukdmjdmparts.co.uk


Return to “Pictures”

Who is online

Users browsing this forum: No registered users and 0 guests