Page 1 of 1

Valve Cover Garnishes

Posted: August 9th, 2013, 7:06 pm
by chedda_j
As seen on FB, the engraved Valve Cover Garnishes are available and ready to ship for the d16a1/zc. I am also giving away one free on Facebook.

Here are some photos. I also have 10 more than can be done in any colour, and I was also open to do something for the G1teg site. Thanks allot for looking. They are $50 plus shipping. (around $60)

[img]https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash3/1146228_504201029654708_684631277_o.jpg
[/img]
Image

Image

Image

Valve Cover Garnishes

Posted: March 22nd, 2016, 6:42 am
by TeresaEa
Thanks for the reply. My son got ahold of nate shtngit and they figured that they had to pry them from the inside. Once they figured that all 4 popped right out so the valve cover is now all re-gasketted and ready to go. Thanks again


-Shannon

Valve Cover Garnishes

Posted: June 11th, 2016, 9:49 pm
by MikakoFuh
The point goes towards the front of the bike. I believe the valve cover itself has an arrow on the inside that also goes towards the front. If there is no point on the outside of the valve cover.