Valve Cover Garnishes

See what parts our vendors have to offer!

Moderators: Ami, evtsteward


Topic Author
chedda_j
Vendor
Posts: 35
Joined: September 16th, 2012, 5:14 am

Valve Cover Garnishes

Postby chedda_j » August 9th, 2013, 7:06 pm

As seen on FB, the engraved Valve Cover Garnishes are available and ready to ship for the d16a1/zc. I am also giving away one free on Facebook.

Here are some photos. I also have 10 more than can be done in any colour, and I was also open to do something for the G1teg site. Thanks allot for looking. They are $50 plus shipping. (around $60)

[img]https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash3/1146228_504201029654708_684631277_o.jpg
[/img]
Image

Image

Image


TeresaEa
G1 n00b
Posts: 1
Joined: March 13th, 2016, 10:39 pm

Valve Cover Garnishes

Postby TeresaEa » March 22nd, 2016, 6:42 am

Thanks for the reply. My son got ahold of nate shtngit and they figured that they had to pry them from the inside. Once they figured that all 4 popped right out so the valve cover is now all re-gasketted and ready to go. Thanks again


-Shannon


MikakoFuh
G1 n00b
Posts: 1
Joined: June 11th, 2016, 3:28 pm

Valve Cover Garnishes

Postby MikakoFuh » June 11th, 2016, 9:49 pm

The point goes towards the front of the bike. I believe the valve cover itself has an arrow on the inside that also goes towards the front. If there is no point on the outside of the valve cover.


Return to “Vendors”

Who is online

Users browsing this forum: No registered users and 1 guest