What did you do to your teg today?

Non-Topic Converstation - Anything that doesnt belong in another section should be posted here.

Moderators: Ami, evtsteward

User avatar

Pr377yRicky
G1 n00b
Posts: 55
Joined: March 7th, 2005, 6:09 pm
Location: Lake Worth

Re: What did you do to your teg today?

Postby Pr377yRicky » August 21st, 2014, 5:41 am

straighten out the front bumper after taking off the cover, dug out a front turn signal for storage, taped together lower turn signals (87integra) while at work, why? cuz somebody went ahead and hit my car while was at walmart picking up something for lunch. Thank you Fucker for just leaving my shit all fucked up and not waiting for me.
Science says you cannot crap, piss, and nut at the same time. I beg to differ.


d16a3teg
Legit G1Tegger
Posts: 123
Joined: September 15th, 2012, 10:54 am
Location: Melbourne, Australia

Re: What did you do to your teg today?

Postby d16a3teg » August 21st, 2014, 8:50 am

I ordered my mounts for a B16a swap into the integra today - wish me luck!
Vacuum advance to vtec woohoo should be fun - a 6 month project begins with the first purchase......
70 N360
86 Integra SX16
88 CRX Si
90 Integra LS Vtec
03 MDX
08 Subaru Outback

User avatar

raisedhaze
Legit G1Tegger
Posts: 128
Joined: October 19th, 2012, 6:55 pm
Location: MN

Re: What did you do to your teg today?

Postby raisedhaze » August 21st, 2014, 1:35 pm

d16a3teg wrote:I ordered my mounts for a B16a swap into the integra today - wish me luck!
Vacuum advance to vtec woohoo should be fun - a 6 month project begins with the first purchase......


Good luck man! It's well worth the effort. :D

My update:

Adjusted my clutch a bit (hydro master cylinder linkage) to get it to engage more close to the floor. I also drained out the tranny which was filled with 5W-30 and replaced it with Honda MTF and put in a Blox magnetic tranny drain plug. Then I RTVed an exhaust union that was leaking.

I also put in the rear speakers since I had an RS which came with only 2. Then I grabbed a stereo harness off Amazon and put in an Alpine deck that I had from another car. I might also put in a rear spare tire subwoofer from an RSX. I don't need a lot of bass, but I like a more full sound.
________________________
1986 Acura Integra Type-RS
B18C1 turbo swap
________________________

User avatar

evtsteward
Site Admin & Crunkass Teg Mechanic
Posts: 847
Joined: January 28th, 2007, 7:05 pm
Location: Marysville, Wa 98270

Re: What did you do to your teg today?

Postby evtsteward » August 28th, 2014, 4:02 pm

Replaced water pump and alternator. Helped Kevin (KRoundy) replace his control arms/ball joints. :geek:
Robert, that crazy guy with all the tegs!
Always an honor to be quoted.-B18Ch1ck
The great ships hung in the air in much
the same way bricks don't.-Douglas Adams

The value of life can be measured by how many
times your soul has been deeply stirred.-Soichiro Honda

User avatar

Mikakey
Legit G1Tegger
Posts: 124
Joined: May 31st, 2014, 5:49 am
Location: Plattsburgh, NY 12901

Re: What did you do to your teg today?

Postby Mikakey » August 30th, 2014, 4:55 pm

Good luck on the swaps. Document it! I love reading them.

Sent from my Z796C using Tapatalk
Blue 1987 Integra
B20VTEC with Stage 2 Exedy clutch and lightweight flywheel, DC headers, custom exhaust with APEXi muffler, and Hondata S300 tune.
Upgrade Motoring 27.5mm torsion bars with KYB GR-2s and B&G rear springs.

User avatar

Integra
Legit G1Tegger
Posts: 125
Joined: February 20th, 2014, 9:10 am
Location: Gorredijk - Holland

Re: What did you do to your teg today?

Postby Integra » September 6th, 2014, 6:09 pm

The whole week I was busy putting her together.
Today, I was driving and loving her!!!

BIG smyle on my face! :)


redteg73
Legit G1Tegger
Posts: 159
Joined: September 16th, 2012, 3:38 am
Location: Virginia, where the bacon is at

Re: What did you do to your teg today?

Postby redteg73 » September 8th, 2014, 2:13 am

Autocrossed it for the first time in a year or so.


thebranded
Posts: 123
Joined: May 9th, 2005, 1:19 pm
Location: Sydney, Australia

Re: What did you do to your teg today?

Postby thebranded » September 23rd, 2014, 1:34 am

Oil change over the weekend, just ticked over to 230,000 km (142 915 m)
started installing an alarm/keyless enrty
Rover 416i aka Honda aka Acura

Suspension: Illumi's all round, 24mm torsions (waiting to be installed) Cusco front strut bar
Intake: K&N Drop in filter
Exhurst: 2" SS 75% parts aquired.

User avatar

Mr NW Classic
NW Classic Honda
Posts: 426
Joined: September 13th, 2012, 4:33 am
Location: Seattle, WA
Contact:

Re: What did you do to your teg today?

Postby Mr NW Classic » September 25th, 2014, 10:41 pm

I am just happy to have my Integra running again. No more rod knock! Thanks again Robert! :)
"Your one stop shop for pre-1988 Honda/Acura parts"
206-940-8173 :D

72-87 Civic
84-87 CRX
86-89 Integra
79-87 Prelude
76-89 Accord

User avatar

evtsteward
Site Admin & Crunkass Teg Mechanic
Posts: 847
Joined: January 28th, 2007, 7:05 pm
Location: Marysville, Wa 98270

Re: What did you do to your teg today?

Postby evtsteward » September 26th, 2014, 12:28 am

You sir, are most welcome. Glad I could push the envelope a little for you! :lol: Now you can flip me off when I'm in your hood if I get this job delivering parts with my SE.
Robert, that crazy guy with all the tegs!
Always an honor to be quoted.-B18Ch1ck
The great ships hung in the air in much
the same way bricks don't.-Douglas Adams

The value of life can be measured by how many
times your soul has been deeply stirred.-Soichiro Honda

User avatar

raisedhaze
Legit G1Tegger
Posts: 128
Joined: October 19th, 2012, 6:55 pm
Location: MN

Re: What did you do to your teg today?

Postby raisedhaze » October 1st, 2014, 1:53 pm

Found some hinged screw caps at home depot for my rain tray!

http://www.homedepot.com/p/10-Black-Hin ... crew+cover

Image

Image

Just FYI - My car is a 1986 so fitment may be different on a 88/89.
________________________
1986 Acura Integra Type-RS
B18C1 turbo swap
________________________

User avatar

Integra
Legit G1Tegger
Posts: 125
Joined: February 20th, 2014, 9:10 am
Location: Gorredijk - Holland

Re: What did you do to your teg today?

Postby Integra » October 1st, 2014, 2:00 pm

Nice....

I did a lot to my Teg, but mostly driving and loving it

Image

User avatar

Integra
Legit G1Tegger
Posts: 125
Joined: February 20th, 2014, 9:10 am
Location: Gorredijk - Holland

Re: What did you do to your teg today?

Postby Integra » October 3rd, 2014, 4:21 pm

Me (on the left) and my friend took Teggie out camping :)

Image

User avatar

evtsteward
Site Admin & Crunkass Teg Mechanic
Posts: 847
Joined: January 28th, 2007, 7:05 pm
Location: Marysville, Wa 98270

Re: What did you do to your teg today?

Postby evtsteward » October 3rd, 2014, 11:43 pm

Skeeter patrol!! :lol:
Robert, that crazy guy with all the tegs!
Always an honor to be quoted.-B18Ch1ck
The great ships hung in the air in much
the same way bricks don't.-Douglas Adams

The value of life can be measured by how many
times your soul has been deeply stirred.-Soichiro Honda

User avatar

Topic Author
MinkelR
Site Admin
Posts: 628
Joined: November 23rd, 2006, 10:25 pm
Location: Bellingham, WA

Re: What did you do to your teg today?

Postby MinkelR » October 6th, 2014, 10:59 pm

Changed out my OBX header for my DC header. Also put in some new bulbs and spark plugs. Gonna change the air & fuel filter and the distributor cap/rotor/spark plug wires when they come in the mail.
1987 Acura Integra LS (Rest in Pieces)
1989 Acura Integra LS Daily Driver
1992 Mazda 323 (Sold)


87g1teger
Legit G1Tegger
Posts: 401
Joined: January 1st, 2005, 10:49 pm
Location: The 310!!
Contact:

Re: What did you do to your teg today?

Postby 87g1teger » October 8th, 2014, 4:23 am

watch her collect dust while she waits idly by while she waits for her be series swap.... teins... full leather interior...oh.... how I wish I could driver her...
Use the "View Active Topics" button on the main page to see what's going on..
"Bro, I only have two hands and one dick. I could only put in one mouth at a time." - Jon Martin
Hacking up your Hondas and Acuras Since 05'!

User avatar

raisedhaze
Legit G1Tegger
Posts: 128
Joined: October 19th, 2012, 6:55 pm
Location: MN

Re: What did you do to your teg today?

Postby raisedhaze » October 8th, 2014, 4:01 pm

87g1teger wrote:watch her collect dust while she waits idly by while she waits for her be series swap.... teins... full leather interior...oh.... how I wish I could driver her...


Please elaborate! I'd like to see pictures too if you have them.
________________________
1986 Acura Integra Type-RS
B18C1 turbo swap
________________________

User avatar

Mr NW Classic
NW Classic Honda
Posts: 426
Joined: September 13th, 2012, 4:33 am
Location: Seattle, WA
Contact:

Re: What did you do to your teg today?

Postby Mr NW Classic » October 9th, 2014, 2:11 am

I looked at it. It's still there.
"Your one stop shop for pre-1988 Honda/Acura parts"
206-940-8173 :D

72-87 Civic
84-87 CRX
86-89 Integra
79-87 Prelude
76-89 Accord


d16a3teg
Legit G1Tegger
Posts: 123
Joined: September 15th, 2012, 10:54 am
Location: Melbourne, Australia

Re: What did you do to your teg today?

Postby d16a3teg » February 6th, 2015, 10:09 pm

Today I painted the plastic surrounds on the headlights
70 N360
86 Integra SX16
88 CRX Si
90 Integra LS Vtec
03 MDX
08 Subaru Outback

User avatar

Topic Author
MinkelR
Site Admin
Posts: 628
Joined: November 23rd, 2006, 10:25 pm
Location: Bellingham, WA

Re: What did you do to your teg today?

Postby MinkelR » April 26th, 2015, 8:24 pm

Replaced the OEM axles. Holy crap those things were worn!
1987 Acura Integra LS (Rest in Pieces)
1989 Acura Integra LS Daily Driver
1992 Mazda 323 (Sold)

User avatar

Mr NW Classic
NW Classic Honda
Posts: 426
Joined: September 13th, 2012, 4:33 am
Location: Seattle, WA
Contact:

Re: What did you do to your teg today?

Postby Mr NW Classic » April 28th, 2015, 3:39 pm

Got pulled over by MLT PD by a cute female officer to tell me how great looking the car was. :)
"Your one stop shop for pre-1988 Honda/Acura parts"
206-940-8173 :D

72-87 Civic
84-87 CRX
86-89 Integra
79-87 Prelude
76-89 Accord

User avatar

Biscuit
Legit G1Tegger
Posts: 353
Joined: October 15th, 2004, 3:29 pm
Location: Florence Alabama 35630

Re: What did you do to your teg today?

Postby Biscuit » April 29th, 2015, 9:44 am

It got washed for the first time in two years.
"If I had a nickle for every time that I buckled under pressure I would have five nickles."
Hank Hill

88RS RIP 9-1995 - 3-2006
89LS RIP 3-2006 - 9-2010
88SE FUN FUN FUN!!!

User avatar

Bag
Site Admin
Posts: 41
Joined: June 25th, 2002, 3:55 am
Location: Lake Worth, TX 76135
Contact:

Re: What did you do to your teg today?

Postby Bag » August 6th, 2015, 1:32 pm

Got off my butt and did some more bodywork on it. One of these years it WILL have paint again. :)
Randy

Telling it like it is.....since 1977
Owner / Administrator http://www.g1teg.org
My black 88 Special Edition

User avatar

Topic Author
MinkelR
Site Admin
Posts: 628
Joined: November 23rd, 2006, 10:25 pm
Location: Bellingham, WA

Re: What did you do to your teg today?

Postby MinkelR » September 3rd, 2015, 8:13 pm

Did the rear brakes. Unseized the rear drivers caliper and temporarily filled in the pitting in the caliper piston with JB Weld until I can grab a new caliper. Works great! :D
Took me 3 years but I finally put the engine bay valances back underneath the car too.
1987 Acura Integra LS (Rest in Pieces)
1989 Acura Integra LS Daily Driver
1992 Mazda 323 (Sold)


d16a3teg
Legit G1Tegger
Posts: 123
Joined: September 15th, 2012, 10:54 am
Location: Melbourne, Australia

Re: What did you do to your teg today?

Postby d16a3teg » September 5th, 2015, 10:26 am

Drove it to the airport - 6 months since the last outing. Got pulled over by the police on the way home for a breath test and inspection of the car - all good and passed well.
70 N360
86 Integra SX16
88 CRX Si
90 Integra LS Vtec
03 MDX
08 Subaru Outback

User avatar

Topic Author
MinkelR
Site Admin
Posts: 628
Joined: November 23rd, 2006, 10:25 pm
Location: Bellingham, WA

Re: What did you do to your teg today?

Postby MinkelR » September 10th, 2015, 7:26 pm

Rebuilt both front calipers, right rear, and replaced the left rear caliper. Stops on a dime now! Took some pictures and put them up in the FAQ/How-To forum.
1987 Acura Integra LS (Rest in Pieces)
1989 Acura Integra LS Daily Driver
1992 Mazda 323 (Sold)

User avatar

silverecco
G1 n00b
Posts: 17
Joined: December 15th, 2012, 7:25 pm
Location: RVA

Re: What did you do to your teg today?

Postby silverecco » September 10th, 2015, 8:35 pm

Finally replaced the front shocks with some KYBs that were given to me by a buddy who found them while cleaning out his garage. he sold his g1 years ago. i have the rears, too, so hopefully I can get those installed on saturday afternoon. I think they're going to be a little more laborious. It was definitely wayyyy overdue.... Image

User avatar

Topic Author
MinkelR
Site Admin
Posts: 628
Joined: November 23rd, 2006, 10:25 pm
Location: Bellingham, WA

Re: What did you do to your teg today?

Postby MinkelR » December 18th, 2015, 9:36 pm

Made a 2.25" header back exhaust for it a few weeks ago to replace the leaky stock exhaust. Noticeable improvement on the butt dyno. Replaced the cylinder head exhaust manifold studs yesterday. The two bottom corner studs were sheared off below the surface. Got them out pretty easily with a welder :mrgreen: .
New hardware! The engine needs a good pressure wash and valve cover needs to be repainted again.
Image
1987 Acura Integra LS (Rest in Pieces)
1989 Acura Integra LS Daily Driver
1992 Mazda 323 (Sold)


89firstgen
G1 n00b
Posts: 9
Joined: October 22nd, 2015, 10:26 pm

Re: What did you do to your teg today?

Postby 89firstgen » January 5th, 2016, 3:31 am

i cut the rust out of my rear quarter and started on the body work


omus808
G1 n00b
Posts: 7
Joined: June 26th, 2016, 3:33 am

Re: What did you do to your teg today?

Postby omus808 » June 26th, 2016, 5:43 pm

Was contemplating on putting a filter over the breather hose leading to my engine( 89 integra ls). but after viewing other peoples posts I figured I'll just stick with my ghetto rig I did myself, Which essentially consists of me cutting the original oem intake tubing and modifying it to fit securely with the filter. It works... Not sure if getting metal tubing would be better but after looking forever for a tube that would fit my breather hose, to no successl, I decided to deal with what I had.
In conclusion, been thinking of eventually swapping to a manual. since I have a god awful automatic. No sense in selling my car when It's in perfect working condition and has only 161 miles on it.. ( I know right?)
Anyone with some knowledge in doing this procedure? how difficult? what parts needed?

User avatar

evtsteward
Site Admin & Crunkass Teg Mechanic
Posts: 847
Joined: January 28th, 2007, 7:05 pm
Location: Marysville, Wa 98270

Re: What did you do to your teg today?

Postby evtsteward » June 30th, 2016, 12:55 am

Besides the regular mechanicals all you have to do is connect the auto park or neutral slide switch connectors to allow the engine to start.
Robert, that crazy guy with all the tegs!
Always an honor to be quoted.-B18Ch1ck
The great ships hung in the air in much
the same way bricks don't.-Douglas Adams

The value of life can be measured by how many
times your soul has been deeply stirred.-Soichiro Honda

User avatar

evtsteward
Site Admin & Crunkass Teg Mechanic
Posts: 847
Joined: January 28th, 2007, 7:05 pm
Location: Marysville, Wa 98270

Re: What did you do to your teg today?

Postby evtsteward » June 30th, 2016, 12:56 am

Changing the gauge package doesn't do this since the wire harness is different. You'll have to put up with having the PRDL1 being lit up unless you disconnect the back lights.
Robert, that crazy guy with all the tegs!
Always an honor to be quoted.-B18Ch1ck
The great ships hung in the air in much
the same way bricks don't.-Douglas Adams

The value of life can be measured by how many
times your soul has been deeply stirred.-Soichiro Honda


d16a3teg
Legit G1Tegger
Posts: 123
Joined: September 15th, 2012, 10:54 am
Location: Melbourne, Australia

Re: What did you do to your teg today?

Postby d16a3teg » July 9th, 2016, 3:05 pm

Got VTEC to work properly in my B16 swap.....only took a year or so to figure out how to get a speed signal!
70 N360
86 Integra SX16
88 CRX Si
90 Integra LS Vtec
03 MDX
08 Subaru Outback


Return to “NTC”

Who is online

Users browsing this forum: No registered users and 1 guest