Seat brackets/sliders

Post pics and descriptions of Aftermarket parts

Moderators: Ami, evtsteward

User avatar

Topic Author
Mikakey
Legit G1Tegger
Posts: 124
Joined: May 31st, 2014, 5:49 am
Location: Plattsburgh, NY 12901

Seat brackets/sliders

Postby Mikakey » July 10th, 2014, 4:31 am

If anyone is interested in getting aftermarket seats for our cars, I found a site today that makes brackets and sliders for "1985-1987" and "1988-1989" Integras (among other vehicles.)
You pick the vehicle first, then select which brand of seat you are planning on using and then if you want them to be locked in place or single slider or double slider.
It also looks like they can make them for other brands(maybe ebay brands) because there is an option for "Other - Please Call"

http://wedgebrackets.com/seat-sliders.html
Last edited by Mikakey on July 10th, 2014, 10:17 pm, edited 1 time in total.
Blue 1987 Integra
B20VTEC with Stage 2 Exedy clutch and lightweight flywheel, DC headers, custom exhaust with APEXi muffler, and Hondata S300 tune.
Upgrade Motoring 27.5mm torsion bars with KYB GR-2s and B&G rear springs.

User avatar

john89teg
G1 n00b
Posts: 59
Joined: June 1st, 2014, 8:54 pm
Location: Arlington, Texas

Re: Seat brackets/sliders

Postby john89teg » July 10th, 2014, 10:10 pm

Mikakey wrote:If anyone is interested in getting aftermarket seats for our cars, I found a site today that makes brackets and sliders for "1985-1987" and "1988-1989" Integras (among other vehicles.)
You pick the vehicle first, then select which brand of seat you are planning on using and then if you want them to be locked in place or single slider or double slider.
It also looks like they can make them for other brands(maybe ebay brands) becasue there is an option for "Other - Pleas Call"

http://wedgebrackets.com/seat-sliders.html


Good to know Mikakey!

Sent from my Z796C using Tapatalk
"Who needs a signature?" -John89teg

User avatar

Topic Author
Mikakey
Legit G1Tegger
Posts: 124
Joined: May 31st, 2014, 5:49 am
Location: Plattsburgh, NY 12901

Re: Seat brackets/sliders

Postby Mikakey » July 10th, 2014, 10:16 pm

alegaspi87 wrote:They don't have pics on the seats that you choose though :(

No. They don't. But I am assuming that they are all the same bolt patterns within a brand. So for example, you'd have to find your own corbeau seats and then buy a bracket or two for that brand.

The site is just responsible for making the brackets.

Sent from my Z796C using Tapatalk
Blue 1987 Integra
B20VTEC with Stage 2 Exedy clutch and lightweight flywheel, DC headers, custom exhaust with APEXi muffler, and Hondata S300 tune.
Upgrade Motoring 27.5mm torsion bars with KYB GR-2s and B&G rear springs.


redteg73
Legit G1Tegger
Posts: 159
Joined: September 16th, 2012, 3:38 am
Location: Virginia, where the bacon is at

Re: Seat brackets/sliders

Postby redteg73 » July 15th, 2014, 2:42 am

I bought my driver's seat adapter from them, took a little while, but well made. I will buy from them again.

User avatar

Topic Author
Mikakey
Legit G1Tegger
Posts: 124
Joined: May 31st, 2014, 5:49 am
Location: Plattsburgh, NY 12901

Re: Seat brackets/sliders

Postby Mikakey » July 15th, 2014, 7:34 am

redteg73 wrote:I bought my driver's seat adapter from them, took a little while, but well made. I will buy from them again.

Nice! What kind of seats and what kind were the brackets you purchased?

Sent from my Z796C using Tapatalk
Blue 1987 Integra
B20VTEC with Stage 2 Exedy clutch and lightweight flywheel, DC headers, custom exhaust with APEXi muffler, and Hondata S300 tune.
Upgrade Motoring 27.5mm torsion bars with KYB GR-2s and B&G rear springs.


redteg73
Legit G1Tegger
Posts: 159
Joined: September 16th, 2012, 3:38 am
Location: Virginia, where the bacon is at

Re: Seat brackets/sliders

Postby redteg73 » July 17th, 2014, 1:37 am

I have a sparco torino, the brackets came from wedge engineering. Going with a sparco evo for the driver for better hold and move the torino to the passenger seat soon.

User avatar

john89teg
G1 n00b
Posts: 59
Joined: June 1st, 2014, 8:54 pm
Location: Arlington, Texas

Re: Seat brackets/sliders

Postby john89teg » July 17th, 2014, 3:34 am

Could you take a few pics when you move the seat? I'd love to see the workmanship on the brackets.

Sent from my Z796C using Tapatalk
"Who needs a signature?" -John89teg


Return to “Aftermarket”

Who is online

Users browsing this forum: No registered users and 1 guest