Anyone ever seen this intake mani gasket?

Post your pics here!

Moderators: Ami, evtsteward

User avatar

Topic Author
silentsnow31802
Legit G1Tegger
Posts: 220
Joined: August 14th, 2012, 2:43 am
Location: Napa, Ca
Contact:

Anyone ever seen this intake mani gasket?

Postby silentsnow31802 » May 18th, 2013, 12:32 am

Its plastic and very thick... Anyone ever seen such a thing?
Image
Snow

User avatar

staticchmbr
G1 n00b
Posts: 45
Joined: March 1st, 2005, 7:43 pm
Location: south east, PA

Re: Anyone ever seen this intake mani gasket?

Postby staticchmbr » May 18th, 2013, 5:12 pm

ive seen a couple companies make them (hondata, blox, obx, etc) .. they keep the heat from your head off of the intake manifold for cooler temps. they seem to work pretty well
If you don't live for something, you'll die for nothing!

*boosted dohc 87 crx*

User avatar

Topic Author
silentsnow31802
Legit G1Tegger
Posts: 220
Joined: August 14th, 2012, 2:43 am
Location: Napa, Ca
Contact:

Re: Anyone ever seen this intake mani gasket?

Postby silentsnow31802 » May 18th, 2013, 10:51 pm

staticchmbr wrote:ive seen a couple companies make them (hondata, blox, obx, etc) .. they keep the heat from your head off of the intake manifold for cooler temps. they seem to work pretty well


Ohh that makes sense.... Too bad its so thick, the bolts barely thread on with it in place.
Snow


Mr NW Classic

Re: Anyone ever seen this intake mani gasket?

Postby Mr NW Classic » May 19th, 2013, 4:57 am

Easy fix. Use longer blots. These things do work well in any Honda engine.

User avatar

Topic Author
silentsnow31802
Legit G1Tegger
Posts: 220
Joined: August 14th, 2012, 2:43 am
Location: Napa, Ca
Contact:

Re: Anyone ever seen this intake mani gasket?

Postby silentsnow31802 » May 19th, 2013, 5:58 am

Mr NW Classic wrote:Easy fix. Use longer blots. These things do work well in any Honda engine.


I would have to change all the studs in the head :-\
Snow

User avatar

Spunkster
G1 n00b
Posts: 94
Joined: January 7th, 2003, 7:14 am
Location: Los Angeles, CA
Contact:

Re: Anyone ever seen this intake mani gasket?

Postby Spunkster » June 3rd, 2013, 12:33 am

ITs not that hard to change them out, just double nut the studs and remove them then put in longer ones.

That is a Hondata gasket: http://hondata.com/heatshieldgasket.html
88 Integra LS w/ B18C5 Turbo
317hp and 212tq
ITR #265 w/ JRSC STOLEN on 10/6/03
Image

User avatar

te37drift
G1 n00b
Posts: 26
Joined: September 4th, 2007, 11:50 pm
Location: Olympia, WA
Contact:

Re: Anyone ever seen this intake mani gasket?

Postby te37drift » June 9th, 2013, 3:12 am

Spunkster wrote:ITs not that hard to change them out, just double nut the studs and remove them then put in longer ones.

That is a Hondata gasket: http://hondata.com/heatshieldgasket.html


+1

a lot of times with aftermarket manifolds, the include new studs to accommodate the thicker flange. technically, an aftermarket gasket like this will benefit in two ways. 1, it reduces intake temperatures, and 2, being thicker, in a round-a-bout way it increases runner length, resulting in larger intake volume.
here's to nipples. with out them, tits wouldn't have a point.


JLAUDIOinCIVIC
Legit G1Tegger
Posts: 115
Joined: December 23rd, 2003, 11:31 pm
Location: hampton, va
Contact:

Re: Anyone ever seen this intake mani gasket?

Postby JLAUDIOinCIVIC » June 11th, 2013, 4:32 pm

88 integra ls se black/gold- semi daily
88 yugo gv. motor less
84 nissan 200sx/s12. ka24e powered if i ever get off my ass
84 gmc 1500, small block. hauler, dd for now

User avatar

Topic Author
silentsnow31802
Legit G1Tegger
Posts: 220
Joined: August 14th, 2012, 2:43 am
Location: Napa, Ca
Contact:

Re: Anyone ever seen this intake mani gasket?

Postby silentsnow31802 » June 11th, 2013, 7:00 pm

Ill put replacing the studs on a list of things to do when I remove the engine for its rebuild. God knows when that will be though lol.
Snow


Return to “Pictures”

Who is online

Users browsing this forum: No registered users and 1 guest