B-Series Engine Bay

Post your pics here!

Moderators: Ami, evtsteward


Topic Author
247christian
Legit G1Tegger
Posts: 203
Joined: September 18th, 2012, 4:59 am
Location: San Jose, California

B-Series Engine Bay

Postby 247christian » January 23rd, 2013, 6:05 am

To the ppl who are b series post pics of your engine bay.
I'll start it off. My Old setup in my 89rs.
Brake lines tucked, Wire tucked, and battery relocated to the trunk.
b20b with b17 gsr tranny and 4-1 dc header
ps dnt mind the small intake tube. i used the d series one for a show bcuz it was cleaner
Image
Last edited by 247christian on January 28th, 2013, 6:04 am, edited 1 time in total.

User avatar

Mr NW Classic
NW Classic Honda
Posts: 426
Joined: September 13th, 2012, 4:33 am
Location: Seattle, WA
Contact:

Re: B-Series Engine Bay

Postby Mr NW Classic » January 24th, 2013, 2:03 am

So pretty!
"Your one stop shop for pre-1988 Honda/Acura parts"
206-940-8173 :D

72-87 Civic
84-87 CRX
86-89 Integra
79-87 Prelude
76-89 Accord

User avatar

MugenBOI
Legit G1Tegger
Posts: 282
Joined: September 18th, 2012, 2:15 pm
Location: Santa Maria,Ca CENRTAL COAST

Re: B-Series Engine Bay

Postby MugenBOI » January 26th, 2013, 4:24 pm

247christian wrote:To the ppl who are b series post pics of your engine bay.
I'll start it off. My Old setup in my 89rs.
Brake lines tucked, Wire tucked, and battery relocated to the trunk.
b20b with b17 gsr tranny and 4-1 dc header
ps dnt mind the small intake tube. i used the d series one for a show bcuz it was cleaner
Image


very very nice 8-)

User avatar

Spunkster
G1 n00b
Posts: 94
Joined: January 7th, 2003, 7:14 am
Location: Los Angeles, CA
Contact:

Re: B-Series Engine Bay

Postby Spunkster » January 30th, 2013, 12:07 am

Will take another pic tomorrow if I can now that it's all in the 88.


This is the old 87
Image
88 Integra LS w/ B18C5 Turbo
317hp and 212tq
ITR #265 w/ JRSC STOLEN on 10/6/03
Image

User avatar

RSBAD454
Site Admin & Crunkass Teg Mechanic
Posts: 17
Joined: June 27th, 2002, 2:33 pm
Location: (Nor Cal)
Contact:

Re: B-Series Engine Bay

Postby RSBAD454 » December 4th, 2013, 7:42 pm

Here is mine back in 2001.

Image

User avatar

Mikakey
Legit G1Tegger
Posts: 124
Joined: May 31st, 2014, 5:49 am
Location: Plattsburgh, NY 12901

Re: B-Series Engine Bay

Postby Mikakey » July 23rd, 2014, 4:16 am

Out with the old:Image

In with the new!:
Image


Sent from my Z796C using Tapatalk
Blue 1987 Integra
B20VTEC with Stage 2 Exedy clutch and lightweight flywheel, DC headers, custom exhaust with APEXi muffler, and Hondata S300 tune.
Upgrade Motoring 27.5mm torsion bars with KYB GR-2s and B&G rear springs.


redteg73
Legit G1Tegger
Posts: 159
Joined: September 16th, 2012, 3:38 am
Location: Virginia, where the bacon is at

Re: B-Series Engine Bay

Postby redteg73 » July 23rd, 2014, 9:58 pm

Oh man that's pretty

User avatar

raisedhaze
Legit G1Tegger
Posts: 128
Joined: October 19th, 2012, 6:55 pm
Location: MN

Re: B-Series Engine Bay

Postby raisedhaze » July 28th, 2014, 10:29 pm

My Turn!

GSR motor, Mitsu Evo 8 turbo, custom manifold-intercooler-charge pipes, tucked a bunch of stuff.

Image

Cruise is in there which wasn't in the RS. I plan to add AC which the RS also didn't have (turbo manifold is compatible with it) and possibly an MR2 power steering pump, but it's not killing me yet.
________________________
1986 Acura Integra Type-RS
B18C1 turbo swap
________________________

User avatar

Mikakey
Legit G1Tegger
Posts: 124
Joined: May 31st, 2014, 5:49 am
Location: Plattsburgh, NY 12901

Re: B-Series Engine Bay

Postby Mikakey » July 29th, 2014, 8:26 am

Nice bay! I love the black on black with the silver cover and the custom piping is sexy.
By the way, how do you expect to add A/C to the b series?

Sent from my Z796C using Tapatalk
Blue 1987 Integra
B20VTEC with Stage 2 Exedy clutch and lightweight flywheel, DC headers, custom exhaust with APEXi muffler, and Hondata S300 tune.
Upgrade Motoring 27.5mm torsion bars with KYB GR-2s and B&G rear springs.

User avatar

raisedhaze
Legit G1Tegger
Posts: 128
Joined: October 19th, 2012, 6:55 pm
Location: MN

Re: B-Series Engine Bay

Postby raisedhaze » July 29th, 2014, 5:29 pm

I plan to put in a B-series compressor with a custom bracket, a custom condenser, utilize existing AC components inside, and make custom lines and dryer.
________________________
1986 Acura Integra Type-RS
B18C1 turbo swap
________________________

User avatar

Mikakey
Legit G1Tegger
Posts: 124
Joined: May 31st, 2014, 5:49 am
Location: Plattsburgh, NY 12901

Re: B-Series Engine Bay

Postby Mikakey » July 30th, 2014, 3:45 am

Sweet man. That'd make a hell of a write up!

Sent from my Z796C using Tapatalk
Blue 1987 Integra
B20VTEC with Stage 2 Exedy clutch and lightweight flywheel, DC headers, custom exhaust with APEXi muffler, and Hondata S300 tune.
Upgrade Motoring 27.5mm torsion bars with KYB GR-2s and B&G rear springs.


88'RS_TEG
G1 n00b
Posts: 37
Joined: September 24th, 2012, 1:56 am
Location: Raleigh, NC

Re: B-Series Engine Bay

Postby 88'RS_TEG » May 19th, 2017, 4:15 pm

All of these look awesome! Hope to get another G1 and swap in the B18 from my wrecked 98' LS someday.
Looking for another AV1, currently have 1 wrecked 98' LS sedan...


Return to “Pictures”

Who is online

Users browsing this forum: No registered users and 1 guest