87 rs.. bought off memeber of the FB page

Post your pics here!

Moderators: Ami, evtsteward


Topic Author
JLAUDIOinCIVIC
Legit G1Tegger
Posts: 115
Joined: December 23rd, 2003, 11:31 pm
Location: hampton, va
Contact:

87 rs.. bought off memeber of the FB page

Postby JLAUDIOinCIVIC » March 5th, 2013, 12:26 am

sooo i bought this car off facebook. unseen. it turned out to be alot cleaner than i thought. so im fixing the problems.. i havent desided if im going to resale it or just give it to my dad to drive. i cant keep it due to having way way to many cars as is

Image
Image
Image
Image
Image
Image
Image
88 integra ls se black/gold- semi daily
88 yugo gv. motor less
84 nissan 200sx/s12. ka24e powered if i ever get off my ass
84 gmc 1500, small block. hauler, dd for now

User avatar

Mr NW Classic
NW Classic Honda
Posts: 426
Joined: September 13th, 2012, 4:33 am
Location: Seattle, WA
Contact:

Re: 87 rs.. bought off memeber of the FB page

Postby Mr NW Classic » March 5th, 2013, 2:42 am

Cool looking spoiler.
"Your one stop shop for pre-1988 Honda/Acura parts"
206-940-8173 :D

72-87 Civic
84-87 CRX
86-89 Integra
79-87 Prelude
76-89 Accord


Topic Author
JLAUDIOinCIVIC
Legit G1Tegger
Posts: 115
Joined: December 23rd, 2003, 11:31 pm
Location: hampton, va
Contact:

Re: 87 rs.. bought off memeber of the FB page

Postby JLAUDIOinCIVIC » March 9th, 2013, 2:23 am

water pump/o-ring, timing belt/tens. came in today.. top end kit should be here monday.. hoping to get the bay cleaned and painted red again. aswell as the fenders/bumper. might remove the head tom. after work. next week on my breaks, ill pull the valves and cut the valve seats(3 angle) and whatnot. might do a little porting but probably not on this motor..
88 integra ls se black/gold- semi daily
88 yugo gv. motor less
84 nissan 200sx/s12. ka24e powered if i ever get off my ass
84 gmc 1500, small block. hauler, dd for now


Topic Author
JLAUDIOinCIVIC
Legit G1Tegger
Posts: 115
Joined: December 23rd, 2003, 11:31 pm
Location: hampton, va
Contact:

Re: 87 rs.. bought off memeber of the FB page

Postby JLAUDIOinCIVIC » March 10th, 2013, 12:38 am

well did round one of cleaning the bay.. probly sand on it tom..

also pulled the head off.. doesnt look to bad but once i checked out the pistons.. seems like the oil seal on number 2 isnt wiping all the oil clean(ie burning oil). so i just ordered new rings and rod bearings..

Image
Image
Image

well 2 and 3 from the pics looks like there burning oil. also the water pump was straight hammered. i didnt see where the head gasket blown :?
88 integra ls se black/gold- semi daily
88 yugo gv. motor less
84 nissan 200sx/s12. ka24e powered if i ever get off my ass
84 gmc 1500, small block. hauler, dd for now


Topic Author
JLAUDIOinCIVIC
Legit G1Tegger
Posts: 115
Joined: December 23rd, 2003, 11:31 pm
Location: hampton, va
Contact:

Re: 87 rs.. bought off memeber of the FB page

Postby JLAUDIOinCIVIC » March 10th, 2013, 5:54 pm

its super nice out, so its has started
Image
Image
Image
Image
Image
88 integra ls se black/gold- semi daily
88 yugo gv. motor less
84 nissan 200sx/s12. ka24e powered if i ever get off my ass
84 gmc 1500, small block. hauler, dd for now


Topic Author
JLAUDIOinCIVIC
Legit G1Tegger
Posts: 115
Joined: December 23rd, 2003, 11:31 pm
Location: hampton, va
Contact:

Re: 87 rs.. bought off memeber of the FB page

Postby JLAUDIOinCIVIC » March 10th, 2013, 7:30 pm

Image
Image
88 integra ls se black/gold- semi daily
88 yugo gv. motor less
84 nissan 200sx/s12. ka24e powered if i ever get off my ass
84 gmc 1500, small block. hauler, dd for now


Topic Author
JLAUDIOinCIVIC
Legit G1Tegger
Posts: 115
Joined: December 23rd, 2003, 11:31 pm
Location: hampton, va
Contact:

Re: 87 rs.. bought off memeber of the FB page

Postby JLAUDIOinCIVIC » March 11th, 2013, 10:29 pm

top half is done..
Image

parts! now just wating on the rings and bearings
Image
Image
88 integra ls se black/gold- semi daily
88 yugo gv. motor less
84 nissan 200sx/s12. ka24e powered if i ever get off my ass
84 gmc 1500, small block. hauler, dd for now


79cord
G1 n00b
Posts: 23
Joined: December 1st, 2009, 6:58 am
Location: Melboure, Australia
Contact:

Re: 87 rs.. bought off memeber of the FB page

Postby 79cord » March 12th, 2013, 2:36 am

Looks dramatic so far. Best wishes for it.


Topic Author
JLAUDIOinCIVIC
Legit G1Tegger
Posts: 115
Joined: December 23rd, 2003, 11:31 pm
Location: hampton, va
Contact:

Re: 87 rs.. bought off memeber of the FB page

Postby JLAUDIOinCIVIC » March 13th, 2013, 11:16 pm

took the head into work.. its all clean, blasted the cambers and valve seats.. cleaned again.. probably start cutting the valve seats soon aswell as clean the valves

came home to found some parts at my door! but the retards sent me rod bearings, main bearings and t-washer.. no rings.. i ordered was for rod bearings and rings... GREAT! so much for having the bottom end put togather this weekend.. this is the first time iv ever had my order jacked up, i sent them a message since i cant call them. wish they would have sent some kinda of contact info with the parts.. now i have to wait and hope you they send me the rings.
88 integra ls se black/gold- semi daily
88 yugo gv. motor less
84 nissan 200sx/s12. ka24e powered if i ever get off my ass
84 gmc 1500, small block. hauler, dd for now


Topic Author
JLAUDIOinCIVIC
Legit G1Tegger
Posts: 115
Joined: December 23rd, 2003, 11:31 pm
Location: hampton, va
Contact:

Re: 87 rs.. bought off memeber of the FB page

Postby JLAUDIOinCIVIC » March 15th, 2013, 1:01 am

good news. the seller sent me a email with a tracking number for my rings! said he was sorry his coworker messed up. so as of now looks like i got a set of free main bearings and t-washers for my se when i get ready to rebuild that motor soon.

friend of mine bought over a engine stand! sooo ill have update pics this weekend of the head/block :mrgreen:
88 integra ls se black/gold- semi daily
88 yugo gv. motor less
84 nissan 200sx/s12. ka24e powered if i ever get off my ass
84 gmc 1500, small block. hauler, dd for now


redteg73
Legit G1Tegger
Posts: 159
Joined: September 16th, 2012, 3:38 am
Location: Virginia, where the bacon is at

Re: 87 rs.. bought off memeber of the FB page

Postby redteg73 » March 16th, 2013, 1:56 am

Good to see you rocking another project. Let me know if you need anything, i still have some parts out of the racecar i think sitting in the garage, mostly interior stuff.


Topic Author
JLAUDIOinCIVIC
Legit G1Tegger
Posts: 115
Joined: December 23rd, 2003, 11:31 pm
Location: hampton, va
Contact:

Re: 87 rs.. bought off memeber of the FB page

Postby JLAUDIOinCIVIC » March 16th, 2013, 10:07 pm

redteg73 wrote:Good to see you rocking another project. Let me know if you need anything, i still have some parts out of the racecar i think sitting in the garage, mostly interior stuff.


yea man! i totally jumped into this one lol.. i still have the SE. ill be pulling the motor and redoing alot of that soon.. need to get this car, then the 240sx i picked up done.. have a few bikes that need to get put togather aswell before i can mess with that car lol!..

liked to get my s12 up and running(probably build a ka for it) so i can dd that while the se is apart :twisted:


message me what you have left. i might be interested in the stuff either for this or the se
88 integra ls se black/gold- semi daily
88 yugo gv. motor less
84 nissan 200sx/s12. ka24e powered if i ever get off my ass
84 gmc 1500, small block. hauler, dd for now


Topic Author
JLAUDIOinCIVIC
Legit G1Tegger
Posts: 115
Joined: December 23rd, 2003, 11:31 pm
Location: hampton, va
Contact:

Re: 87 rs.. bought off memeber of the FB page

Postby JLAUDIOinCIVIC » March 17th, 2013, 11:12 pm

messed with the blocked today for a few.. spent more time trying to get it clean!.. removed the pistons/rods all the oil rings are stuck so im really glad im re-ringing it.. also honed the block, still need to hit it with some 280/cross hatchs. also installed the water pump for the hell of it :lol:
88 integra ls se black/gold- semi daily
88 yugo gv. motor less
84 nissan 200sx/s12. ka24e powered if i ever get off my ass
84 gmc 1500, small block. hauler, dd for now

User avatar

MugenBOI
Legit G1Tegger
Posts: 282
Joined: September 18th, 2012, 2:15 pm
Location: Santa Maria,Ca CENRTAL COAST

Re: 87 rs.. bought off memeber of the FB page

Postby MugenBOI » March 18th, 2013, 2:02 pm

what kind of paint did you use on your engine bay boss ?


Topic Author
JLAUDIOinCIVIC
Legit G1Tegger
Posts: 115
Joined: December 23rd, 2003, 11:31 pm
Location: hampton, va
Contact:

Re: 87 rs.. bought off memeber of the FB page

Postby JLAUDIOinCIVIC » March 18th, 2013, 6:24 pm

i have no idea.. but when i got back outside ill get the brand and what not.. the color isnt a match but its close enought for my like

some more pics.. might try and clean it one more time after i get it put togather in the car
Image
Image

painted the coolent tube(duno the term for it). also see where the coolent lines would be going in to the oil filter thingy.. wasnt going to replace those but when i went to pull one off to paint. it was so dry rotting and just fell apart soooo the're getting replaced
Image

valves are sooo clean! the exhaust valves had alot of build up so it took the blaster to get them off the face(why there white)
Image

even took the time to clean the sensors and bolts
Image

clean cambers! still havent cut the seats or removed the old gaskets
Image
Image
88 integra ls se black/gold- semi daily
88 yugo gv. motor less
84 nissan 200sx/s12. ka24e powered if i ever get off my ass
84 gmc 1500, small block. hauler, dd for now


Topic Author
JLAUDIOinCIVIC
Legit G1Tegger
Posts: 115
Joined: December 23rd, 2003, 11:31 pm
Location: hampton, va
Contact:

Re: 87 rs.. bought off memeber of the FB page

Postby JLAUDIOinCIVIC » March 22nd, 2013, 10:59 pm

finally got the head done!(ended up just cutting the valve seats 45*'s and relapping them. also installed new valve seals, and cleaning it for the 5th time!).. will be cleaning the pistons up tom on my lunch break.. and my rings came in today! so hopefully i can get the motor put together this weekend!. or atleast the bottom end and the head installed..

i still need to get new hoses, plugs, oil filter(thought that one picd was a spare from my other teg but it doesnt fit), plugs wires, dist cap and so on.. but for now id like to get this motor back in the car!
88 integra ls se black/gold- semi daily
88 yugo gv. motor less
84 nissan 200sx/s12. ka24e powered if i ever get off my ass
84 gmc 1500, small block. hauler, dd for now


Topic Author
JLAUDIOinCIVIC
Legit G1Tegger
Posts: 115
Joined: December 23rd, 2003, 11:31 pm
Location: hampton, va
Contact:

Re: 87 rs.. bought off memeber of the FB page

Postby JLAUDIOinCIVIC » March 24th, 2013, 5:24 pm

motor is coming togather!

Image
Image
Image
Image
Image
88 integra ls se black/gold- semi daily
88 yugo gv. motor less
84 nissan 200sx/s12. ka24e powered if i ever get off my ass
84 gmc 1500, small block. hauler, dd for now

User avatar

KRoundy
G1 n00b
Posts: 32
Joined: September 11th, 2012, 4:43 am

Re: 87 rs.. bought off memeber of the FB page

Postby KRoundy » March 27th, 2013, 3:12 am

So clean. You do good work, friend!
1988 Montreal Blue RS 5-Speed Coupe
"Blue Rocket"


Topic Author
JLAUDIOinCIVIC
Legit G1Tegger
Posts: 115
Joined: December 23rd, 2003, 11:31 pm
Location: hampton, va
Contact:

Re: 87 rs.. bought off memeber of the FB page

Postby JLAUDIOinCIVIC » May 6th, 2013, 3:25 am

KRoundy wrote:So clean. You do good work, friend!



thanks!


havent updated this in awhile.. got the motor all done, installed and running. replaced all the vac lines, plug wires, plugs, coolent lines, pretty much everything.. still need to order some coolent hoses(lower and the small ones) before i can drive it but already did 2 heat cycles on the motor.. next will be a drive it once the hoses and dist. cap/rotor come in. also primed the blue with red primer so its not so eye catching. washed the inside/out today.

need to get some kind of filter/air box set up since one didnt come with the car.. one good thing the car doesnt make any more weird noises while running and also the rpms dont surge! smooth idle is so nice!

probably order some struts/shocks for it aswell soon.. might throw my TSWs on this car and put the oem golds back on my se..
88 integra ls se black/gold- semi daily
88 yugo gv. motor less
84 nissan 200sx/s12. ka24e powered if i ever get off my ass
84 gmc 1500, small block. hauler, dd for now


Topic Author
JLAUDIOinCIVIC
Legit G1Tegger
Posts: 115
Joined: December 23rd, 2003, 11:31 pm
Location: hampton, va
Contact:

Re: 87 rs.. bought off memeber of the FB page

Postby JLAUDIOinCIVIC » May 6th, 2013, 6:09 pm

hopfuly the rest of my parts will be here at any time now! the red doesnt really match but looks better than the blue..


Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

this is the paint i used
Image
88 integra ls se black/gold- semi daily
88 yugo gv. motor less
84 nissan 200sx/s12. ka24e powered if i ever get off my ass
84 gmc 1500, small block. hauler, dd for now


247christian
Legit G1Tegger
Posts: 203
Joined: September 18th, 2012, 4:59 am
Location: San Jose, California

Re: 87 rs.. bought off memeber of the FB page

Postby 247christian » May 8th, 2013, 4:40 am

Those door panels are dope!

User avatar

87g1teger
Legit G1Tegger
Posts: 381
Joined: January 1st, 2005, 10:49 pm
Location: The 310!!
Contact:

Re: 87 rs.. bought off memeber of the FB page

Postby 87g1teger » May 8th, 2013, 5:35 am

Loving it!!!
Use the "View Active Topics" button on the main page to see what's going on..
"Bro, I only have two hands and one dick. I could only put in one mouth at a time." - Jon Martin
Hacking up your Hondas and Acuras Since 05'!


Topic Author
JLAUDIOinCIVIC
Legit G1Tegger
Posts: 115
Joined: December 23rd, 2003, 11:31 pm
Location: hampton, va
Contact:

Re: 87 rs.. bought off memeber of the FB page

Postby JLAUDIOinCIVIC » May 14th, 2013, 1:34 am

thanks thanks

the door panels are pretty neat. they came already done..

drove the car over 100miles today.. motor did great.. cant say the same for the rest of the car.. hit a bump and the car wants to change lanes.. pretty scary 100miles lol. but gonna order new shocks/struts soon aswell as new lower control arms.. everything is tight. no up and down or side to side. but the lowers were loose when i had the hub off and the shocks/struts are toast. also putting my 16in mini wheels on. suck tho i only have 3 so ill have to run a full size spare untill i can find a 4th wheel.. also running my 1in wheel spacers and rolling the fenders.. will be lower the car alittle once i get the shocks/struts
88 integra ls se black/gold- semi daily
88 yugo gv. motor less
84 nissan 200sx/s12. ka24e powered if i ever get off my ass
84 gmc 1500, small block. hauler, dd for now


Topic Author
JLAUDIOinCIVIC
Legit G1Tegger
Posts: 115
Joined: December 23rd, 2003, 11:31 pm
Location: hampton, va
Contact:

Re: 87 rs.. bought off memeber of the FB page

Postby JLAUDIOinCIVIC » June 24th, 2013, 11:33 pm

rolled the last 2 fenders today, and swapped/painted the tsws. and installed a radio..

Image
Image
Image
Image
88 integra ls se black/gold- semi daily
88 yugo gv. motor less
84 nissan 200sx/s12. ka24e powered if i ever get off my ass
84 gmc 1500, small block. hauler, dd for now


Topic Author
JLAUDIOinCIVIC
Legit G1Tegger
Posts: 115
Joined: December 23rd, 2003, 11:31 pm
Location: hampton, va
Contact:

Re: 87 rs.. bought off memeber of the FB page

Postby JLAUDIOinCIVIC » June 27th, 2013, 11:52 pm

they are wrapped.. no stickers..

as far as the mon.'s im not a fan.. i have them on the rear of my se and well they blew out in less than a year.. i have shachs up front again totally trashed in 2 months.. my roommate is buying the car to use for work so i probably wont put much more into this.. i wanna do a b18 swap in my se and i got 2 other cars i need to finish building
88 integra ls se black/gold- semi daily
88 yugo gv. motor less
84 nissan 200sx/s12. ka24e powered if i ever get off my ass
84 gmc 1500, small block. hauler, dd for now


redteg73
Legit G1Tegger
Posts: 159
Joined: September 16th, 2012, 3:38 am
Location: Virginia, where the bacon is at

Re: 87 rs.. bought off memeber of the FB page

Postby redteg73 » July 9th, 2013, 12:31 am

Needs moar low. I forget how tall these things are. Looking good though.


88betty
G1 n00b
Posts: 3
Joined: October 8th, 2013, 4:37 am

Re: 87 rs.. bought off memeber of the FB page

Postby 88betty » November 17th, 2013, 10:50 pm

Looks real good
88 black Se - stock
88 red rs - 97 itr swap

User avatar

tony85
G1 n00b
Posts: 14
Joined: September 11th, 2012, 1:09 am
Location: Gloucester VA,23061

Re: 87 rs.. bought off memeber of the FB page

Postby tony85 » February 6th, 2014, 11:06 am

Haven't been on the forum lately, I see you've been busy. I'll be doing a rebuild on the my integra as soon as i feel like putting in the wrench time. I might have to get you to do my head. My machinist is cool and all but I'm always lookin for a deal lol. You've made progress with that thing sir, keep up the good work!! LOL redteg I as thinking the same thing!! One of these days we need to do a mini meet. Perhaps in Norfolk, go visit Lewis, the current owner of the ole slut :lol:


Topic Author
JLAUDIOinCIVIC
Legit G1Tegger
Posts: 115
Joined: December 23rd, 2003, 11:31 pm
Location: hampton, va
Contact:

Re: 87 rs.. bought off memeber of the FB page

Postby JLAUDIOinCIVIC » March 31st, 2014, 7:31 pm

traded this car for a b16/gsr swap plus cash, he drove it for awhile and then the trans went, got a 88 for free from a friends mom. soo its going to the scrap yard soon. but i got a ton of spare parts for mine tho
88 integra ls se black/gold- semi daily
88 yugo gv. motor less
84 nissan 200sx/s12. ka24e powered if i ever get off my ass
84 gmc 1500, small block. hauler, dd for now


Return to “Pictures”

Who is online

Users browsing this forum: No registered users and 2 guests