How to completely flush power steering fluid.

Member submissions, commonly asked questions, how-tos on various projects, etc.

Moderators: Ami, evtsteward

User avatar

Biscuit
Legit G1Tegger
Posts: 353
Joined: October 15th, 2004, 3:29 pm
Location: Florence Alabama 35630

Re: How to completely flush power steering fluid.

Postby Biscuit » September 5th, 2014, 10:17 am

You can also attach a power tool to the pulley bolt with the belt removed and pump the fluid into a container and also drain what remains from the rack hoses. There is no reason to reset the ECU. If you want to be certain that any garbage is removed from the system just repeat the process two more times.

Nathan
"If I had a nickle for every time that I buckled under pressure I would have five nickles."
Hank Hill

88RS RIP 9-1995 - 3-2006
89LS RIP 3-2006 - 9-2010
88SE FUN FUN FUN!!!

User avatar

Mikakey
Legit G1Tegger
Posts: 124
Joined: May 31st, 2014, 5:49 am
Location: Plattsburgh, NY 12901

Re: How to completely flush power steering fluid.

Postby Mikakey » September 5th, 2014, 3:49 pm

Good write up! I wish I had power steering to try this.

Sent from my Z796C using Tapatalk
Blue 1987 Integra
B20VTEC with Stage 2 Exedy clutch and lightweight flywheel, DC headers, custom exhaust with APEXi muffler, and Hondata S300 tune.
Upgrade Motoring 27.5mm torsion bars with KYB GR-2s and B&G rear springs.


Return to “FAQ/How-to/Articles”

Who is online

Users browsing this forum: No registered users and 2 guests