Cluster swap

Member submissions, commonly asked questions, how-tos on various projects, etc.

Moderators: Ami, evtsteward

User avatar

Topic Author
G1 n00b
Posts: 26
Joined: September 4th, 2007, 11:50 pm
Location: Olympia, WA

Cluster swap

Postby te37drift » July 14th, 2014, 5:12 am

I scrapped my 88 ls a few years ago, but I kept a few things off of the car that I thought might be of some use at a later date. I kept the gauge cluster and dash harness thinking that it might come in handy for someone wanting to do a complete swap on their 86-87. Today I was playing around with my 93 rs and I had the cluster out of it messing with some wiring. Then I got the crazy idea to try and fit the 88 cluster in it. as far as physically fitting, it does, although the shape are slightly different. nothing that some trimming couldn't fix. when it comes to the wiring, the 88 has 3 plugs on the cluster, the 93 has 3 as well, but 2 of them are different sizes. Although, the left side plug is the exact same, and it plugged right in to the 88 cluster.

My hope is to figure out the wiring differences and get the cluster to operate correctly, as they are both speedo cable. If I can do this, it should be just the reverse to get a g2 cluster to work in a g1. I know that there aren't many cool clusters out there for the g1, and the availability is quite scarce. However jdm g2 clusters are a dime a dozen, and for those with a b series vtec swap, having a 9500 rpm tach certainly wouldn't hurt. and neither would the 145 mph speedometer of the u.s. cluster. If I can get it to work, and there's enough interest, I may create a plug and play harness to utilize a g2 cluster in a g1, and possibly vis-versa, although I don't really know why someone would want to downgrade to a g1 cluster.

Does anyone have a thorough and clear wiring pinout of the cluster, in color, with the functions of each wire, and the locations in the plugs? Some of the coloring, I'm sure has faded over the last 27 years.

I'm going to make this same post on g2ic to get a pinout for the g2 as well. Any help would be greatly appreciated.
here's to nipples. with out them, tits wouldn't have a point.

User avatar

Legit G1Tegger
Posts: 128
Joined: October 19th, 2012, 6:55 pm
Location: MN

Re: Cluster swap

Postby raisedhaze » July 14th, 2014, 9:30 pm

This might help. The 86 integra Factory Service Manual is a bit off, so I had to test wires to get it right.

1986 Acura Integra Type-RS
B18C1 turbo swap

Return to “FAQ/How-to/Articles”

Who is online

Users browsing this forum: No registered users and 2 guests